Apex Wheels 18" EC-7RS in Anthracite

Chevrolet 5th Gen Camaro Wheels

Not your car? Find the right fit

Lightweight forged & flow formed APEX wheels for your 2010-2015 Camaro RS, SS, SS 1LE, ZL1, Z/28

i

Sprint Line

Finish: Anthracite

$1,438.00$1,222.30
$215.70 OFF

Chevrolet Camaro 5th Gen Wheel Performance

Most of the factory 5th Gen Camaro wheels are relatively narrow which really limit their capabilities on the street and track. If you want to extract even more performance from your car, a lightweight chassis specific set of wider wheels and tires will make a world of difference. We created forged wheels such as the Apex VS-5RS, SM-10RS, EC-7RS and flow formed wheels such as the ARC-8 and SM-10 to increase performance. Find out what fitment is best for your application in our Chevrolet 5th Gen Camaro Wheel & Tire Fitment Guide.

A Brief History of the 2010-2015 Chevrolet Camaro

The legend returns! After an eight year hiatus, Chevrolet brought back the Camaro with a splash in 2010. Featuring modern amenities seamlessly combined with retro appeal, this 5th generation Camaro had some muscle to back up its good looks. Many advancements in technology had happened since the Camaro was last in production, so Chevrolet started off with a bang by dropping a 6.2L LS3 engine pumping out 426 horsepower and 6 speed Tremec TR-6060 transmission into SS models. This was over 100 horsepower more than the rival Mustang GT at the time, forcing Ford to quickly respond which reignited the rivalry.

What Makes it a Good Track Car

In this generation's second to last production year, GM Performance engineers unveiled their most track focused Pony Car to date. The historic Z/28 name was donned on just 1800 cars across 2014 and 2015 making them very rare for a modern production vehicle. They featured the behemoth LS7 from the C6 Z06, pumping out 505 horsepower, carbon ceramic brakes, and wider fender arches to accommodate sticky Pirelli Trofeo R compound tires. Air conditioning was also optional, as if you had any doubts about the seriousness of this car. With a stripped out interior, the Z/28 weighed about 300 lbs less than a ZL1 and was the lightest V8 powered 5th Gen Camaro offered at roughly 3800 lbs. Shortly after the public unveiling, GM took their creation to the world famous German race track for testing: Track-Capable Camaro Z/28 Validated at Nurburgring. Have a Z/28 and want to go even faster? Our selection of 5th Gen Camaro wheels has everything you need to put bigger, stickier rubber under your car.

EC-7RS Specifications

Front
Rear
Wheel Size
18x11" ET7
Face Profile
Profile 4
Bolt Pattern
5x120mm
Center Bore
67.1mm
Centering Ring
N/A Direct fit
Lug Seat
60 Degree Conical
Center Cap
Gloss Black
OEM Cap
Compatible*
Load Rating
1,600 lbs
Weight
21.4 lbs
Tested By
STL
Test Reference #
STL-AX1-0006
Front Profile

* Designed to fit Camaro center caps

5th Gen Gallery

  • Silver Chevrolet Camaro - SM-10 in Anthracite
  • Black Chevrolet Camaro - SM-10 in Satin Black
  • Black Chevrolet Camaro - EC-7 in Anthracite
  • Black Chevrolet Camaro - ARC-8 in Satin Black
  • Black Chevrolet Camaro - ARC-8 in Anthracite
  • Red Chevrolet Camaro - SM-10 in Race Silver
  • Green Chevrolet Camaro - ARC-8 in Anthracite

Fitment Help

Which Wheels Should I Get?

Check out our Fitment Guides, the most in-depth, authoritative guides for wheel and tire fitments, tailored for your vehicle and how you drive it.

EC-7RS Features

10K-Pressure-Apex-wheels.jpg

10K Tons of Pressure

Our new forgings weigh as much as 120 pounds before machining. To form such a thick blank we require special equipment capable of 10,000 metric tons of pressure. This extreme pressure increases the strength of the aluminum by eliminating porosity and improving the grain structure.

True Motorsport Blanks

Many companies use 3rd-party blanks intended for non-motorsport wheels which can severely limit sizes, concavity, spoke design, and critical brake clearance. We designed our very own blank profiles from scratch to give us total control over the final product.

Learn More

Side-Milled Spokes

One of the most significant upgrades to the EC-7RS is the addition of wider and deeper side-milled spokes. Any excess material that doesn’t add strength is carved out using a precision CNC ball cutter. Side-milling is often deemed cost-prohibitive by others, but for true performance without compromise we believe it's essential.

Learn More

A Stronger Lightweight Wheel

Our forged Sprint™ wheels are lightweight without the strength compromises found on typical lightweight wheels. First, we carved out as much material as possible, then we purposefully added one pound back to reinforce critical areas, creating a stronger inner lip and a higher load rating.² What’s the point of a lightweight wheel if it’s fragile?

Load Ratings (lbs)
JWL Load Standard 1521
Typical Forged Wheels 1521
APEX Flow Formed 1550
APEX Forged Sprint™ Line 1600

Weight Optimized

We conducted extensive Finite Element Analysis (FEA) to reinforce high-stress areas and to remove material where it didn’t improve strength. The result is a wheel that is exceptionally light without the strength compromises found on typical lightweight wheels.²

APEX Sprint™ Line
18 lbs 1600 lbs
APEX Flow Formed
21 lbs 1550 lbs
  • Wheel Weight
  • Load Rating
STL-radial-test-logo-Apex-EC-7RS

Independently Tested

We don't rely solely on computer simulations or unverifiable in-house testing. We believe independent testing is critical to protect consumers in this unregulated industry. We chose STL, an independent lab in Ohio, to test our Sprint™ wheels far above JWL standards, including increases in testing duration, impact drop height, and total load.

Learn More

Tougher Inner Lip

Introducing the Sprint™ spec inner lip, with a unique channel profile that makes it even stronger than our previous designs. So even though our Sprint™ wheels are pounds lighter than comparable flow formed wheels, the inner lip is stronger.

32%

More reinforcement

than our flow formed wheels3

Learn More

Big Brake Clearance

From day one, APEX has been on a mission to build wheels that clear big brakes. Our new forged wheels are the product of everything we’ve developed over the past 10+ years, including an innovative high-clearance barrel design and vehicle-specific spoke profiles.

Deeper Concavity

Our new forgings were redesigned to create extra deep, concave spoke profiles. Their new shape allows us to make any profile, from flat to deep and everything in between. Each one is optimized for a specific application using 3D laser scans of factory and aftermarket brake kits.

Paintless Knurled Bead

Whether it's a day at the track or months of street driving, repeated hard braking and acceleration can make a tire slip along the bead seat and go out of balance, causing vibration. Knurled beads help, but are less effective when painted over. Our forged line features unpainted knurled beads that stay sharp and maximize grip.

Learn More

Built for Impact Sockets

Track wheels need track tools. Don’t settle for wheels that require undersized tuner lugs or thin walled sockets. All APEX wheels accommodate over-sized race lugs and impact sockets to make swapping wheels lightning fast.

32mm

Socket Diameter Clearance

Laser-Engraved Specs

As track enthusiasts ourselves, we know how frustrating it is to try to locate and decipher wheel specs that have been hastily hammered into the rim or become unreadable over time. With our new Sprint™ wheels, we chose to invest a little extra and laser-engrave the specs on the barrel, in plain sight, making them easy to find and read. (You’re welcome.)

Additional Features

Hub Centric

All EC-7RS wheels are purpose built for select vehicle applications. Very few applications require centering rings.

Center Caps

All APEX wheels come with our gloss black cap included that is interchangeable with the OE cap. We also offer additional colors for select fitments.

Wheel Hardware

APEX wheels can be used with all OEM mounting hardware, proper aftermarket hardware and most wheel spacers. Wheel locks and stud conversion kits also work perfectly.

TPMS

All APEX wheels accept OEM and aftermarket Tire Pressure Monitoring Sensors and standard fit valve stems. If you don’t have sensors, then select from our metal stems available in multiple finishes.

EC-7RS Warranty

A Wheel You Can Depend On

All Apex Wheels come with a lifetime structural warranty against defects in workmanship and materials, plus a 1 year finish warranty. Exchanges are fast, easy, and hassle-free.
See terms and conditions.

Accidental Damage
Replacement

Curb rash or pothole damage on the street? Make an oopsie at the track? We’ve all been there. APEX is proud to offer 50% off replacement wheels, no matter the damage.
See terms and conditions.

¹ EC-7RS Vs. the original EC-7R comparing side milling of 18x9” ET46 5x130 fitment

² Strength and weight comparisons are based on an 18” BMW 5x120 wheel.

³ Comparing the amount of material reinforcement in our standard inner lip profile vs Sprint™ spec inner lip profile on an 18” wheel.

⁴ All wheels compared with equivalent 18x10” ET25 5x120mm / 72.56mm fitment