Audi 8V S3 Wheels

Lightweight forged & flow formed APEX wheels for your 2015-2021 Audi 8V S3

Construction Type

All

Forged Sprint line

Forged Touring line

Flow Formed Evolution line

Finish: Anthracite

In Stock
In Stock

Total

$1,556.00

Overview

Audi 8V S3 Wheel Performance

With an extremely tuneable chassis and drivetrain the Audi 8V S3 can be a quick and competent car. However, with a few power and suspension mods, the OEM 8V S3 wheels and tires can quickly become a weak point of the car. If you want to extract even more performance from your S3, a lightweight chassis specific set of wider wheels and tires will make a world of difference. Available in our popular Flow Formed SM-10 and Forged VS-5RS designs, you can browse all of 8V S3 fitments via our chassis specific Audi 8V S3 Wheel & Tire Fitment Guide.

Before checking out our selection of 8V S3 wheels, let’s first take a brief look at the history of this car and what has made it so popular amongst enthusiasts since it hit the market.

The third generation Audi 8V S3 made its first appearance in late 2013, offering a 2.0l turbo 4-cylinder with an output just shy of 300 horsepower at the crank. The 8V S3 continued to be sold in international markets from 2014-2021. Power is sent through a 6-speed manual, or optional 6-speed DSG transmission, paired with Audi’s excellent Quattro AWD system. This potent drivetrain combined with a relatively lightweight chassis allows the 8V S3 to put down some respectable acceleration times, while offering decent cornering speeds as well. In 2016, the S3 was subject to a mid-cycle facelift that involved a few aesthetic changes, as well as some chassis and engine tuning. However, the biggest change was the introduction of the new 7-speed DSG transmission as standard, without any options for a 6-speed manual on the car moving forward. If you want to fully take advantage of your 8V S3’s chassis and drivetrain, a set of Apex 8V S3 wheels in a wide and aggressive fitment will allow you to do just that.

One of the best aspects of the 8V S3 is the enormous aftermarket parts support, as the chassis and drivetrain are shared across a plethora of other VW/Audi models. While 8V S3 wheels are going to offer the best “bang for your buck” as far as performance and aesthetics go, there are plenty of other solid mods you can do to unlock your 8V S3’s peak performance. Modded Euros wrote an excellent 8V S3 modding guide, which offers a perfect starting point to learn all about the popular aftermarket parts and accessories available for these cars.

SM-10 Specifications

 
Front
Rear
SKU
SM1018...
SM1018...
Wheel Size
18x8.5" ET43
18x8.5" ET43
Face Profile
Profile 1
Profile 1
Bolt Pattern
5x112mm
5x112mm
Center Bore
57.1mm
57.1mm
Centering Ring
N/A Direct fit
N/A Direct fit
Lug Seat
R13 Ball Seat
R13 Ball Seat
Center Cap
Gloss Black
Gloss Black
OEM Cap
Compatible*
Compatible*
Load Rating
1,543 lbs
1,543 lbs
Weight
~20.8 lbs
~20.8 lbs
Tested By
VIA
VIA
Test Reference #
VIA-26-1445
VIA-26-1445
Front Profile
Rear Profile
Product image
Product image

 Reproductive Harm -  www.p65warnings.ca.gov

Fitment guides

Which Wheels Should I Get?

Check out our Fitment Guides, the most in-depth, authoritative guides for wheel and tire fitments, tailored for your vehicle and how you drive it.

SM-10 features

The Flow Form Advantage

Flow forming enables us to create high performance wheels without the price premium of forging. It improves the mechanical properties and grain structure of the barrel, increasing its strength and stiffness, which allows us to use less material and reduce weight. Thanks to our superior engineering, our flow formed wheels have a higher load rating than some competitors' forged wheels.

"I" Beam Spokes

One of the most prominent features of the SM-10 is its advanced "I" beam spoke machining. Any excess material that doesn’t add strength is carved out from the sides of the spokes using a precision CNC ball cutter. This process is often deemed cost-prohibitive by others, but for performance without compromise we believe it's essential.

Bigger, Tougher Inner Lip

The inner lip is the most vulnerable part of a wheel because it has no spokes for support. Our Flow Formed Evolution line adds more material to this high-impact area as an extra layer of protection against track berms, potholes, and whatever else the road may throw at you.

Maximizing Concavity

We use the deepest concave face profiles we can for every application after factoring in critical clearances such as brake calipers. The SM-10 utilizes 3 unique profiles to make this possible, with the deepest concave face delivering reduced weight and a stunningly aggressive appearance.

Big Brake Clearance

Big brakes often require bigger, heavier, more expensive wheels, which aren’t ideal in a performance environment. The SM-10 is one of our many wheels which solve this problem. Through comprehensive laser scanning and endless rounds of test-fitting, we’ve created 18” wheels to clear huge brakes that typically require 19” wheels from other manufacturers.

Weight Optimized

We conducted extensive Finite Element Analysis (FEA) to reinforce high-stress areas and to remove material where it didn’t improve strength. The result is a wheel that is exceptionally light without the strength compromises found on typical lightweight wheels.²

Built for Impact Sockets

Track wheels need track tools. Don’t settle for wheels that require undersized tuner lugs or thin walled sockets. All APEX wheels accommodate over-sized race lugs and impact sockets to make swapping wheels lightning fast.

32mm

Socket Diameter Clearance

Finishing Touches

The SM-10 is finished using a multi-stage liquid paint over a powder coated base coat. This coating process leaves lug holes, center bores and mounting pads untouched, which ensures proper fit and torque values.

JWL and Beyond

All APEX Flow Formed wheels meet or meaningfully exceed JWL load rating requirements. Some manufacturers don't meet the minimum requirements, yet still claim to be compliant. Always compare load ratings to ensure you aren’t sacrificing critical strength for a slightly lighter wheel.

Learn More

True VIA

The VIA is an independent wheel testing and auditing agency similar to TÜV. Many companies falsely claim their wheels have been certified, and even use the VIA stamp without permission. Our Flow Formed wheels have been certified, and we provide the registration numbers for every wheel. Protect yourself. Demand registration numbers from manufacturers.

Learn More

Additional features

Hub Centric

All SM-10 wheels are purpose built for select vehicle applications. Very few applications require centering rings.

Center Caps

All APEX wheels come with our gloss black cap included that is interchangeable with the OE cap. We also offer additional colors for select fitments.

Wheel Hardware

APEX wheels can be used with all OEM mounting hardware, proper aftermarket hardware and most wheel spacers. Wheel locks and stud conversion kits also work perfectly.

TPMS

All APEX wheels accept OEM and aftermarket Tire Pressure Monitoring Sensors and standard fit valve stems. If you don’t have sensors, then select from our metal stems available in multiple finishes.

A Wheel You Can Depend On

Accidental damage replacement

Curb rash or pothole damage on the street? Make an oopsie at the track? We’ve all been there. APEX is proud to offer 50% off replacement wheels, no matter the damage.

See terms and conditions.

Lifetime warranty

All APEX wheels come with a lifetime structural warranty against defects in workmanship and materials, plus a 1 year finish warranty. Exchanges are fast, easy, and hassle-free.

See terms and conditions.

¹ All wheels compared with equivalent 18x10” ET25 5x120mm /72.56mm fitment

If you like cheap gear you will hate this newsletter.

Subscribe to our newsletter to receive updates about Group Buys, new products, technical articles, and more.