Customer Showcase

Jessie's 2013 Scion FR-S On 18" EC-7R Forged Wheels

Article | 08/12/2020 by Matt Thompson

Jessie stopped by the shop with his well sorted Scion FR-S to check out our new fully forged wheels specifically engineered for the 86/BRZ community. Jessie was very familiar with APEX from his 86 Drive Challenge days. It didn’t take more than a few seconds for him to notice the concavity of the new wheels and the new finishes. We mounted a set of our 18×9.5” ET40 EC-7R wheels in satin gold wrapped in PS4S 265’s. The flush fitment looked great and there was plenty of clearance for his massive front Brembo GT BBK. One of the first comments Jessie made exiting his car when we arrived at the photoshoot location was that he instantly felt the weight savings on the new setup.

WHEELS & TIRES:

18×9.5″ ET40 EC-7R Satin Gold wheels Michelin Pilot Sport 4S Tires 265/35-18

MODIFICATIONS:

Ecutek tuned HKS headers Motiv frontpipe Miltek muffler custom quad tip exhaust TRD intake HKS oil cooler Verus Engineering clutch fork/pivot point

SUSPENSION/BRAKES:

Cusco Zero-3X Coilovers Cusco strut tower brace Cusco front tower braces SPL rear LCAs Whiteline bushings Brembo GT Brake Kit (front) Winmax W3 & W6 brake dads Stoptech SS brakelines RT700 Brake Fluid -2.8* Front, -2.4* Rear Camber

EXTERIOR:

Scion FR-S Limited Edition RS1 kit TRD CF GT wing TRD Fender Fins TRD Fender Extensions TRD Spoiler TRD Oil Filler Cap TRD Fuel Cap Cover TRD Door Stabilizer JDM OE Headlights JDM OEM Tail Lights Verus Engineering Rear Diffuser Verus Engineering Fuel & ECU brackets Verus Engineering undercarriage covers Cusco differential cover.

INTERIOR:

Cusco CF Steering Wheel JDM OE “86” Airbag Defi 52mm Oil Pressure Gauge Ca-Fi Dashlinq Head Unit

Scion FR-S with 18" EC-7R in Satin Gold
Scion FR-S with 18" EC-7R in Satin Gold
Scion FR-S with 18" EC-7R in Satin Gold
Scion FR-S with 18" EC-7R in Satin Gold
Scion FR-S with 18" EC-7R in Satin Gold
Scion FR-S with 18" EC-7R in Satin Gold
Scion FR-S with 18" EC-7R in Satin Gold
Scion FR-S with 18" EC-7R in Satin Gold
Scion FR-S with 18" EC-7R in Satin Gold
Scion FR-S with 18" EC-7R in Satin Gold
Scion FR-S with 18" EC-7R in Satin Gold
Scion FR-S with 18" EC-7R in Satin Gold
Scion FR-S with 18" EC-7R in Satin Gold
Scion FR-S with 18" EC-7R in Satin Gold
Scion FR-S with 18" EC-7R in Satin Gold
Scion FR-S with 18" EC-7R in Satin Gold
Scion FR-S with 18" EC-7R in Satin Gold
Scion FR-S with 18" EC-7R in Satin Gold
Scion FR-S with 18" EC-7R in Satin Gold
Scion FR-S with 18" EC-7R in Satin Gold
Scion FR-S with 18" EC-7R in Satin Gold
Scion FR-S with 18" EC-7R in Satin Gold

Car Owner: @myrx86

Tags
  • Bolt pattern: 5x100mm
  • Fitment type: Hardcore Track
  • Scion, FR-S, ZN6 / Gen 1
  • Wheel design: EC-7R
  • Wheel diameter: 18"
  • Wheel line: Forged Classic Line

Matt Thompson

Matt became the JDM Product Expert at APEX Wheels in 2022. Prior to joining APEX, he worked extensively in automotive sales. As an enthusiast he made the shift from street driving to track driving in order to fully experience his cars at the limit without putting the public at risk. Matt has owned six Hondas (‘94 Integra LS, ‘95 Integra RS, ‘96 Integra GS-R, ‘06 RSX Type-S, ‘95 Civic VX, ‘17 Civic EX-T), two Subarus (‘15 Impreza, ‘22 BRZ), and is likely shopping for the next addition to his stable. When he’s not helping JDM owners figure out the best wheel setups for their cars, he enjoys playing racing video games and indulging his interest in automotive photography. Fun fact: Matt knows every quotable line in The Fast and the Furious by heart.

Have questions about wheels for your JDM vehicle? Use our contact form and ask for Matt.