Are you trying to dial in the fitment or extract the most performance out of your 2017-2019 991.2 Carrera, S, or T? Well, look no further than this Porsche 911 991.2 Carrera, S & T Wheel and Tire fitment Guide. We have various fitments from Performance street and track to Hardcore track fitments for those dedicated track cars. Unlock the full potential of your Narrowbody 991.2 with options like our Forged VS-5RS, EC-7RS. These are a great way to reduce unsprung and rotational mass while maximizing both wheel and tire widths.
Brake Clearance Information
In the engineering phase of wheel development we 3D scan factory brakes and review 2D aftermarket brake templates in order to optimize our barrel profiles and spoke curvatures. As a result, our wheels offer massive brake clearance so you can run the smallest possible wheel diameter.
* The Porsche optional 6 piston 410mm PCCBs require 20" wheels for proper clearance. Read our article for more info.
Rear Axle Steering (RAS) Clearance
All 19" and 20" APEX wheels are optimized to clear rear axle steering (images at bottom of guide).
Bolt Pattern
5x130
Center Bore
71.6mm
Lug Seat
R14 Ball Seat
Thread Pitch
M14x1.5mm
Wider fitments for enhanced performance
Our most popular fitments for the narrowbody 991.2 911 Carrera. With 19" and 20" options available with everything form OEM tire sizes to a 265 front tire akin to a GT3RS, we have you covered no matter the use case. Some options below may require minor suspension modifications to make work so keep an eye out for any fitment notes.
Wheels
Tires
Wheels
Tires
Track focused fitments that require significant modifications
Our fitments focused on outright track time. Get the most performance possible from your 991.2 Carrera with one of these fitments. This may require minor suspension mods to get everything working, but your track car is likely to have them already.
Wheels
Tires
Brake Clearance Information
In the engineering phase of wheel development we 3D scan factory brakes and review 2D aftermarket brake templates in order to optimize our barrel profiles and spoke curvatures. As a result, our wheels offer massive brake clearance so you can run the smallest possible wheel diameter. The following brakes have been tested and confirmed:
Rear Axle Steering Clearance Images With 19" Wheels
Fill out our Fitment Recommendation form Call us: 925-245-0773 Email us: support@apexraceparts.com