APEX 3mm VW/Audi 5x112mm Black Spacers
Apex Small Bore Audi Wheel Spacers - Pair
Hubcentric T6061-T6 aluminum wheel spacers for your Audi with 5x112mm bolt pattern and 57.1mm center bore.
Finish: Black
Total
$55.00Apex Audi Wheel Spacer Kit
Improved Stability & Handling | Additional Wheel Clearance | Enhanced Aesthetics
Tech Specs
| Brand | APEX |
|---|---|
| Bolt Pattern | 5x112mm |
| Center Bore | 57.1mm |
| Hubcentric? | Yes |
| Available Thicknesses | 3, 5, 18, and 20mm |
| Construction | CNC Machined |
| Material | 6061-T6 Aluminum |
| Identification | Laser Engraved |
| Finish | Anodized |
| Available Colors | Black, Silver |
Application List
APEX VW/Audi wheel spacers will work with any of the models/generations listed below.
Fitments by make:
WARNING - Wheel spacers are not intended to be stacked and doing so may result in damage or injury. Proper length extended hardware MUST be used in conjunction with wheel spacers.
Add Some Breathing Room
Make space for your mods. You can’t have your wheels and tires rubbing on your suspension. Use wheels spacers to add enough clearance. There’s only one direction to go and that’s out.
Clear Your Brakes
Not every wheel was destined to fit over your brakes. Give them a hand with wheel spacers to add the clearance necessary for those spokes to spin freely.
Fill Your Fenders
Adequate clearance is a good thing, but excessive gap just doesn’t look right. Get your wheels flush with your fenders using APEX wheel spacers. Available in a wide variety of sizes to allow you to precisely dial in your fitment.
Hardware Required...But Optional
Extended wheel hardware is required for spacers, but if you already own studs or lugs, you shouldn’t be required to purchase hardware with spacers. APEX wheel spacers can be purchased separately from extended hardware so the choice is up to you. Buy them on their own or pair them up with a stud kit or extended lugs.
Stuck Spacers Suck
Say that 10 times fast. Save yourself from the headache. If you’ve owned spacers before, you’ve likely had one seized onto the hub. Instead of using a mallet to free it, utilize a tool meant for removal— a pry bar or screwdriver. We’ve added machined pry points around the spacer’s edge, making even the most seized spacers a breeze to remove.
Stand Out by Blending In
You’ve worked hard on the color scheme and coordination of your car and modifications. Spacers should not be any exception. They are meant to push wheels out, not stand out on their own. Available in two finishes— Black and Silver. Pick the one that compliments your ride.
Stout Construction. Unwavering Dependability.
For us, safety is paramount and to create a reliable, trustworthy spacer and relationship with the customer. We're passionate about racing, and would accept nothing less for ourselves. Without question we had to utilize the best materials and employ military-grade construction methods. We ended up with a CNC machined, 6061-T6 Aluminum spacer with carefully chamfered edges, eliminated stress-risers, and appropriately lightweight design without sacrificing rigidity or surface area.
Instantly Identifiable
Remember trying to solve mystery of identifying spacers either on the car or as they sit loose inside of our tool boxes or parts pins? We do too. What started as scrawling numbers with a screwdriver evolved into clean, legible, laser-engraved size and measurement information on the spacer face and edges.
No, Your Car Isn't Supposed to Shake
At the end of the day, spacers are useless if they vibrate. We’re so confident in our spacers that if they cause any sort of vibrations or shakes, we’ll replace them. Simple as that.
