Trouble with our new site?...

APEX BMW Wheel Spacers

Backordered: ETA 90-120 days.

Finish: Black

$50.00

APEX BMW 5x120mm Spacer Kit

Improved Stability & Handling | Additional Wheel Clearance | Enhanced Aesthetics

Tech Specs

BrandAPEX
Bolt Pattern* 5x112mm / 5x120mm
Center Bore* 66.6mm / 72.56mm
Hubcentric? Yes
Available Thicknesses* 3, 5, 12, 15, 18, 20mm
Construction CNC Machined
Material 6061-T6 Aluminum
Identification Laser Engraved
Finish Anodized
Available Colors Black, Silver

NOTES

*5x112mm bolt pattern spacers have a 66.6mm center bore.

*5x120mm bolt pattern spacers have a 72.56mm center bore.

*20mm spacers only available in 5x120mm bolt pattern.

Application List

Select your vehicle below to determine which spacer bolt pattern is needed.

WARNING - Wheel spacers are not intended to be stacked and doing so may result in damage or injury. Proper length extended hardware MUST be used in conjunction with wheel spacers.

Features

Add Some Breathing Room

Make space for your mods. You can’t have your wheels and tires rubbing on your suspension. Use wheels spacers to add enough clearance. There’s only one direction to go and that’s out.

Clear Your Brakes

Not every wheel was destined to fit over your brakes. Give them a hand with wheel spacers to add the clearance necessary for those spokes to spin freely.

Fill Your Fenders

Adequate clearance is a good thing, but excessive gap just doesn’t look right. Get your wheels flush with your fenders using APEX wheel spacers. Available in a wide variety of sizes to allow you to precisely dial in your fitment.

Available in a Wide Variety of Sizes

One size does not fit all. You’ll need a range of sizes at your disposal if you’re going to perfect your unique fitment. From thin to thick, APEX has your size needs covered.

Hardware Required...But Optional

Extended wheel hardware is required for spacers, but if you already own studs or lugs, you shouldn’t be required to purchase hardware with spacers. APEX wheel spacers can be purchased separately from extended hardware so the choice is up to you. Buy them on their own or pair them up with a stud kit or extended lugs.

Shop APEX Hardware

Stuck Spacers Suck

Say that 10 times fast. Save yourself from the headache. If you’ve owned spacers before, you’ve likely had one seized onto the hub. Instead of using a mallet to free it, utilize a tool meant for removal— a pry bar or screwdriver. We’ve added machined pry points around the spacer’s edge, making even the most seized spacers a breeze to remove.

Stand Out by Blending In

You’ve worked hard on the color scheme and coordination of your car and modifications. Spacers should not be any exception. They are meant to push wheels out, not stand out on their own. Available in two finishes— Black and Silver. Pick the one that compliments your ride.

Stout Construction. Unwavering Dependability.

For us, safety is paramount and to create a reliable, trustworthy spacer and relationship with the customer. We're passionate about racing, and would accept nothing less for ourselves. Without question we had to utilize the best materials and employ military-grade construction methods. We ended up with a CNC machined, 6061-T6 Aluminum spacer with carefully chamfered edges, eliminated stress-risers, and appropriately lightweight design without sacrificing rigidity or surface area.

Instantly Identifiable

Remember trying to solve mystery of identifying spacers either on the car or as they sit loose inside of our tool boxes or parts pins? We do too. What started as scrawling numbers with a screwdriver evolved into clean, legible, laser-engraved size and measurement information on the spacer face and edges.

As If BMW Created Them

Manufactured to perfectly match the measurements and tolerances of your BMW, these spacers are a natural extension of your wheel hub. Sloppy construction, uneven surfaces, and out-of-round shape will result in poor fit and cause vibrations.

No, Your Car Isn't Supposed to Shake

At the end of the day, spacers are useless if they vibrate. We’re so confident in our spacers that if they cause any sort of vibrations or shakes, we’ll replace them. Simple as that.